biettuot: Recyling ideas: sewing dress for kid

Thứ Hai, 25 tháng 7, 2011

Recyling ideas: sewing dress for kid

The "Beachcomber" Dress

Made entirely from white cotton jersey...

With "rope" straps and belt.

It will knock your socks off to know how easy it is to make!

To own the truth, I actually made mine from one of my husband's new white undershirts (Shhh!)

If you're making up to a 3T you can do the same! For larger sizes, I'd recommend getting jersey by the yard to fit you.

1. To start, cut a rectangle that fits around your largest area comfortably, at your desired length + about 4", and sew into a tube. (Or, for smaller sizes, simply cut the bottom of a t-shirt off!)

2. With right side of shirt facing outward, fold the top over about 4". Lay 1/2" wide elastic along the top, and make a small mark just outside it for the casing.

3. Line your needle up with the mark, and take note of where the edge of your fabric matches up on your throat plate (the thing under your presser foot), to make sure your line stays straight. If your plate doesn't have lines you can place a little piece of tape there to mark.

4. Snip a small slit in casing, and use a safety pin to thread your elastic through.

5. Once it's threaded, stitch the ends together, and sew a small piece of fabric over the opening to cover (optional).

6. To make straps, cut six-2" strips, about twice the length of strap you'd like. (The straps will have a nice stretch to them, so it's not necessary to get an exact measurement!)

7. To make a rope braid, pin three strips together, then grab the strip to the far right and twist to the right a few times. Then move it to the far left position, and repeat until it's all done! Super easy!